Powerex battery charger manual

After you have inserted the batteries, you can either charge or condition them. If you wish to charge, simply leave the batteries in the charger. If you wish to condition , press the button located in the front of the charger. Now, simply wait until the appropriate lights show to indicate a full charge. Read these instructions carefully and thoroughly before operating this unit. Rapid Charge Current: 2. Microprocessor: Two independent circuits, capable of charging batteries simultaneously.

It is highly recommended for brand new batteries to be charged and left in the charger overnight for the first charge to fully activate the batteries. Note: when operating the charger outside of its intended region of use, a plug changer may be required to properly connect to the outlet. In most devices, usually two or more batteries are used together.

When batteries are used in a series, the performance is limited by the worst one. In other words, one poorly performing battery can significantly reduce the device runtime. New batteries and those stored for extended period become chemically deactivated. Battery forming is a charge-discharge-charge cycle which forces a full charge into the battery at a very slow rate. This process activates the battery. In certain cases, it needs to be repeated two or three times.

For a rechargeable battery, it is recommended for the battery to be discarded. If this detection is believed to be incorrect, a discharge can be performed first. For batteries that do not perform favorably after using the mode recommended above, the following sequence can be applied. When the programs are in-progress, the charger will display the battery status for each occupied slot consecutively.

The screen will first show an arrow below the active slot and display the information. The next slot s occupied follows. Press this button multiple times if necessary, to go to the desired slot. Note that this number will go up and down slightly from selected rate due to the pulse charging. At any given time during the program, the charger will either be charging, discharging or resting.

See website, www. When returning the unit for warranty service, the product owner must obtain a return merchandise authorization number from a service representative. Your Name. Battery Capacity mAh.