Wcs autocad 2013

The WCS should always be used to reference geometry to ensure everything aligns to the centre of a file in real-world location. To quickly copy a layout, you can right-click a layout tab and select Move or Copy and then choose the Create a copy checkbox option see image below before hitting OK.

Delete constraints. Too many constraints will slow down a drawing and stop copy and paste from working. Often these are not visible in the drawing and can be turned on under the Parametric tab on the ribbon. The COpy command works almost identically to the Move command except that AutoCAD leaves the selected objects in place and makes new copies of them in the new location.

The COpy command creates multiple copies by default. If you want only one copy, press Enter after placing the copy in the drawing. Select objects by clicking them or by using a window or crossing method. To specify a rectangular selection area, click and release the mouse button, move the cursor, and click again.

To create a lasso selection, click, drag, and release the mouse button. Copies objects a specified distance in a specified direction. The following prompts are displayed. A master copy is simply copying another drawing, or creating your own reproduction of an artwork by another artist. After you create a multiline text object in AutoCAD, you can edit it in the same way as a single-line text object: Select the object, right-click, and choose Mtext Edit or Properties.

How to draw cross section in autocad? How to view solid in autocad. Difference between text and mtext in autocad?

How to display angle in autocad? How to activate viewcube in autocad? Is autocad lt good? How to turn off layers in pdf? Close Search for. Adblock Detected Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Pickthe dish from the dialog menu. ChooseDraw, Surfaces, Revolved Surface TypeRevsurf at the command prompt. TypeSurftab1 at the command prompt.

TypeSurftab2 at the command prompt. Direction Vector1. ChooseDraw, Surfaces, Tabulated Surfaces or2. ChooseDraw, Surfaces, Ruled Surface or2. ChooseDraw, Surfaces, Edge Surface or2. ChooseDraw, Solids, Extrude. ChooseDraw, Solids, Revolve or2. ChooseDraw, Solids, Box. Valid integer values are from 0 to Valid values are from 0. Typesphere with facetres 0. TypeCONE at the command prompt. ChooseDraw, Solids, Wedge.

ChooseDraw, Solids, Torus. Command: align Select objects: pick the wedge Select objects: enter Specify first source point: P1 Specify first destination point: P2 Specify second source point: P3 Specify second destination point: P4 Specify third source point or : enter Scale objects based on alignment points? ChooseModify, Solids Editing, Subtract. Select objects: pick the box Select objects: press enter Select solids and regions to subtract ChooseModify, Solids Editing, Union.

ChooseModify, Solids Editing, Intersect or2. Choosea face to extrude. Specifyheight of extrusion or [Path]:. ChooseModify, Solids Editing, Taper face2.

Choosea face s to taper. Specifythe base point: pick the back left corner5. Specifyanother point along the axis of tapering: pick point6. Specifythe taper angle: 45 Solid validation started. Solid validation completed. ChooseModify, Solids Editing, Delete face2. Choosea face to delete. Choosethe face to delete. ChooseModify, Solids Editing, Copy face2. Choosea face to copy. Pickthe solid face to copy. Picka new location. ChooseModify, Solids Editing, Color face2. Choosea face to change the color of.

Choosea color to change the face to. Extrude objects i. Change the UCS and draw an object on a face of one of the walls. ChooseModify, Solids Editing, Imprint. Selecta 3D solid: pick solid3. Selectan object to imprint: pick circle4. Selectthe circle that was imprinted. Deselect any unwanted faces.

ChooseModify, Solids Editing, Clean. Selecta 3D solid: pick imprinted circle. AutoCAD creates new faces by offsetting existing ones inside or outside their original positions. AutoCAD treats continuously tangent faces as single faces when offsetting. ChooseModify, Solids Editing, Shell. Openthe drawing called 3DBottle. Createa layer called Section. Make it the current layer.

ChooseDraw, Solids, Section. Chooseall 3 solids making up the bottle. ChooseModify, Draw, Slice. ChooseFile, New ChooseUse a Template from the startup dialog. This create a new drawing with a border and one floating Model Space.

Note the change to Paper Space. ChooseInsert, Block DWG to insert. Insertthe block anywhere in the Model Space view at a scale of 1 and rotation 0. ChooseDraw, Solids, Setup, View. ChooseDraw, Solids, Setup, Drawing. TypeCommand: soldraw Select viewports to draw: P1 Select objects: 1 found Select objects: enter 3 solids selected. NOTE: If your object was an inserted block, you need to first explode it so it becomes a solid. TypeUCS at the command prompt.

We now need to save this ucs. ChooseDraw, Solids, Setup, Profile. Resultant 3D Modelor 3. Command: solprof Select objects: pick solids Select objects: enter Display hidden profile lines on separate layer? ChooseView, Render, Render Command: render5. Clickthe Render button. Command: render3. ClickQuery for Selection. Choosethe objects to render. ClickCrop Window. Choosea window to render.

ClickSkip Render Dialog. Command: rpref3. Clickthe dropdown list under Viewport. ChooseFile as the destination options. Command: render ChooseRender Window as the destination option. ClickLight Scale Icon and Smoothing to change the values. Light Icon Scale Controls the size of the light blocks in the drawing. The value is the current scale factor in drawing units of rendering blocks in the drawing.

Enter a real number to rescale the blocks. The default is 45 degrees. Angles greater than 45 degrees are considered edges.

Angles less than 45 degrees are smoothed. To define an edge as less than 45 degrees, reduce the smoothing angle. ChooseView, Render, Materials TypeRMAT at the command prompt. Command: rmat Clickthe Materials Library PickConcrete Tile as the material.

Clickthe Preview button. Clickthe Import button. ChooseView, Render, Materials Library. Command: matlib Picka material from the material list. Clickthe Preview button and preview as a sphere or cube. Command: rmat3. PickGlass as the material. Clickthe Attach button. PickObjects to attach materials to. Exitthe materials menu and render the viewport. ChooseView, Render, Render2.